Ret Ring Display Board The Ret Ring holds an Impact Socket onto an Impact Wrench when it's rotating at dangerous speeds up to 5000 rpm. Serious injuries have been caused by flying or slipping retaining pins used with the two-piece system. The Ret Ring is the solution to safer retention of Impact Sockets.
Features: • Molded of new space age polyurethane with tensile strength of over 5000 psi. • Simple one piece construction with hardened resin insert molded at stress points. • 17 sizes to fit all impact sockets (see below).

1-1/4	10005S	3/4"
1-7/16	10032S	3/4"
1-5/8	10034S	3/4"
1-3/4	18708S	3/4"
2	18710S	3/4"
2-1/8	18715S	3/4"
2-1/4	18716S	3/4"
1-3/4	10008S	1"
2	10010S	1"
2-1/8	10015S	1"
2-1/4	10016S	1"
2-1/2	10017S	1"
2-5/8	10019S	1"
2-7/8	10020S	1-1/2"
3-3/8	10025S	1-1/2"
3-7/8	10030S	1-1/2"
4-3/8	10035S	1-1/2"